Can You Replace Just One Tire on an AWD Vehicle? What Tire Shops Check

Lifestyle and People · November, 2026

7 min read · 0 comments

Can You Replace Just One Tire on an AWD Vehicle? What Tire Shops Check 7 min

A nail in the tread or a cut sidewall is annoying on any vehicle. On an all-wheel-drive (AWD) vehicle, it can also raise a question that catches many owners off guard: does one damaged tire mean buying four?

The honest answer is sometimes. Whether a single new tire is acceptable depends on how worn the other three are, how closely the replacement matches them, and what the vehicle’s manufacturer allows. This article explains why AWD systems care about tire size, what shops measure before making a recommendation, and how drivers can follow the conversation when they are standing at the counter.

Why Does Tread Depth Matter So Much on an AWD Vehicle?

A tire’s tread depth affects its overall diameter. A new tire with full tread is slightly taller than a tire that has covered tens of thousands of kilometres. That means it has to turn a little less to cover the same distance.

On a two-wheel-drive car, that small difference rarely matters much. On an AWD vehicle, all four wheels are connected to the drivetrain. When one tire is noticeably larger or smaller than the others, the wheels turn at slightly different speeds even when the vehicle is travelling in a straight line.

The drivetrain then has to make up that difference. Depending on the design, that work falls to parts such as centre differentials, couplings, transfer units or electronically controlled clutches. Those components are built to handle wheel-speed differences in corners and on slippery roads. A constant mismatch on every straight stretch is a different matter.

Not every small difference causes harm. What matters is whether the tires fall outside the range the system was designed to tolerate. That range is set by the vehicle manufacturer, and it varies from one make to another.

What Do Manufacturers and Safety Agencies Say?

Guidance ranges from cautious to strict, depending on the source.

Vehicle makers

Some automakers are explicit. Subaru’s owner’s manuals, for example, state that all four tires must match in manufacturer, tread pattern, construction, degree of wear, speed symbol, load index and size. They warn that mixing tires with different degrees of wear can damage the power train, and Subaru recommends replacing all four tires at the same time.

Other manufacturers publish a specific allowable difference in tread depth or tire circumference. Some leave the details to service information that technicians look up. In every case, the owner’s manual and the manufacturer’s requirements take priority over any general rule of thumb.

Tire makers

Michelin advises that when only one tire is replaced, it should match the other three as closely as possible. That includes remaining tread depth, size, type, brand, model, load rating and speed rating. It also cautions that AWD and four-wheel-drive vehicles need extra care, because acceptable differences vary by vehicle manufacturer.

Transport Canada

Transport Canada’s winter tire guidance makes a related point. Vehicle handling improves when tires with the same type, size, speed rating and load index are fitted on all four wheels. Mixing tread patterns, internal construction or sizes can make a vehicle less stable.

What Does a Tire Shop Check Before Replacing One Tire?

A careful shop treats a single-tire request on an AWD vehicle as a measuring job before it becomes a sales decision. These are the main checks.

Whether the damaged tire can be repaired

The simplest outcome is no replacement at all. A good first question is whether the damaged tire can be repaired, since a proper repair sidesteps the matching problem entirely. If it cannot, the conversation turns to a tire replace and how closely a new tire can match the rest of the set.

Remaining tread on the other three

Technicians measure tread depth on each remaining tire with a gauge, at several points across the tread. One reading is not enough, because tires do not always wear evenly. Those numbers show how far the existing tires have drifted from new.

An exact match on the replacement

The new tire needs to match the others in size, brand, model and construction, as well as load and speed ratings. A tire that is the “same size” on paper but a different model can still differ in actual diameter and behaviour.

Pressure and wear patterns

Inflation pressure affects a tire’s rolling radius, so shops check it alongside tread depth. Uneven wear patterns can also point to alignment or suspension issues that should be dealt with before new rubber goes on.

The manufacturer’s limit

Finally, the measurements are compared against the vehicle maker’s allowable tread or circumference difference. That comparison drives the recommendation, not a blanket shop policy.

When Is One Tire Enough, and When Is It Not?

One new tire is most likely to work when the existing set is still fairly new. If the other three have only worn slightly and an identical replacement is available, the difference may fall within the manufacturer’s limit. Damage early in a tire’s life is the classic case.

The picture changes once the remaining tires are well worn. A brand-new tire next to three half-worn ones can easily exceed what the drivetrain is designed to tolerate. In that situation, shops often recommend two or four tires. Fitting the full set can make more sense than trying to match one new tire to heavily worn ones.

As a general reference point, Michelin’s fallback guidance for matched tires on four-wheel-drive vehicles allows up to 5/32 inch (about 4 mm) of tread-depth variation. That is not a universal AWD specification, though, and many vehicle makers set tighter limits. The vehicle’s own requirement is the one that counts.

What is tire shaving?

Some tire specialists can shave a new tire’s tread down to match the depth of the existing tires. It is a way to keep the set within tolerance without replacing all four. Availability varies, so it is worth asking whether a shop offers it rather than assuming.

Does Winter Change the Decision?

The same rules apply in every season, but winter adds a practical layer in places with a real winter. Across British Columbia, a 2025 Tire and Rubber Association of Canada survey found that 64% of drivers use winter tires. For drivers in and around Terrace, BC who switch between two complete sets each year, that changes the math a little.

With two sets, damage to one tire only affects the set it belongs to. The matching question then applies within that set. A seasonal car tire change is also a natural time to have all four tires measured, since every wheel is already coming off. Knowing where each set stands makes it easier to plan, instead of facing a surprise four-tire bill after a mid-winter puncture.

Regular rotation helps too. Automakers such as Subaru recommend it so tires wear more evenly. Tires that wear evenly stay closer in diameter, which keeps a one-tire replacement on the table for longer if damage happens later.

What Should Drivers Ask Before Agreeing to New Tires?

An AWD tire decision is easier to follow with a few clear questions. Drivers can reasonably ask:

  • What tread depth is left on each of the other three tires?
  • What tread or circumference difference does the vehicle maker allow?
  • Is an identical replacement tire available in the same model and size?
  • Could the damaged tire be repaired instead?
  • If two or four tires are recommended, what measurement is behind that?

A shop that sells car tires should be able to answer each of these with numbers, not just a general rule. The answers also show whether the recommendation is based on the vehicle’s requirements or on habit.

Once the right number of tires is settled, proper tire installation matters as much as the choice itself. Mounting, balancing and correct wheel-nut torque all help the new tires perform as intended.

The Bottom Line

Replacing one tire on an AWD vehicle is possible when the other three are close to new and an exact match is available. When the existing tires are well worn, the drivetrain’s tolerance for mismatched diameters is usually what tips the decision toward two or four.

The deciding factors are measurable: tread depth on every tire, an exact replacement match, and the vehicle maker’s limit. Drivers who understand those three points can make a confident decision rather than guessing whether a four-tire recommendation is necessary.

About Rain Coast Service Centre

Rain Coast Service Centre is a hand wash, quick lube and automotive service facility at 5127 Keith Ave in Terrace, BC. Their tire work covers flat repairs, mounting and installation, balancing, rotations and seasonal changeovers, alongside brake, suspension and diagnostic repairs. Drivers can reach their team at (250) 638-0072 or find their shop on Google Maps.

Share this entry
PN

About the writer

Paola Nadeau

Paola Nadeau is a versatile writer specializing in crafting informative articles and blogs across a spectrum of topics. With a keen eye for detail and a passion for research, Paola has established herself as a reliable source of engaging and educational content. Drawing from her diverse interests and experiences, she seamlessly navigates through various subjects, providing readers with valuable insights and practical knowledge.

Paola's journey as a writer began with a deep curiosity about the world around her, which led her to explore a wide array of subjects ranging from technology and science to literature and culture. Her ability to distill complex information into accessible and compelling narratives makes her work both enlightening and enjoyable to read.

Whether delving into the intricacies of emerging technologies, exploring cultural phenomena, or dissecting the latest trends, Paola approaches each topic with enthusiasm and dedication. Her commitment to delivering high-quality content coupled with her natural talent for storytelling sets her apart in the world of digital media.

When she's not immersed in writing, Paola enjoys traveling, photography, and discovering new cuisines. She resides in [Location], where she continues to pursue her passion for writing and sharing knowledge with her audience.

View all 13,592 articles →