Any welder will tell you that no one welding technique will fix all problems so they need to be well versed in a vast variety of welding processes. There is usually extensive training and schooling that goes along with being a successful welder. The following are a few of the most common types of welding done by Welding Companies in Houston, TX.
TIG, or tungsten inert gas, welding is one of the most technologically advanced welding technique used by Welding Companies in Houston, TX. When TIG welding, the welding machine will create an arc of electricity between the electrode on the end of the welder and the surface you are going to weld. Usually, TIG welding is used in to weld stainless steel and aluminum due to the precision and overall look of the weld itself. This process takes a lot of skill and time due to the fact that most products that get TIG welded need a clean finish, such as cookware or bike frames.
MIG, or metal inert gas, welding is one of the most common techniques used by welding companies in Houston, TX. In MIG welding, wire is feed through an electrode that stays heated enough to weld metal. This process is quite versatile and is used in a wide array of different jobs from industrial to commercial applications. The only disadvantage of this process is that it can not be done outdoors, due to the fact that if the wind blows to hard, the flame can spread from the end of the welding gun. Also, since the flame follows the gas of the machine, it is very hard to get a clean weld, therefore this process is not used for products that require a clean finished weld.
If you find yourself in need of a reputable and knowledgeable welding company, then look no further than the professional team at JK Welding Service LLC. They are experienced in a wide variety of welding techniques and can provide you with high quality work for a reasonable price.
Be the first to like.