When you have the best Industrial Doors in St Louis MO in place in your company, you will notice a dramatic difference in how your company operates as a whole. Sliding glass commercial doors are some of the most popular, and it is for a very good reason. This makes entering and leaving the building simple, no matter how much your customers may have in their hands when they leave. However, these doors do not come without some problems that can arise. Learning to troubleshoot certain issues may help you keep your sliding doors fully functional for a long time.
Doors Will Not Open At All Even Though you Hear the Motor Running
If this is the case, there is most likely something that is preventing the doors from opening as they should. This can be due to ice built up around the lower tracks of the doors or in between the two doors. It can also be caused by a failing motor or a chain that has slipped off track within the regulator box of the system.
The Doors will Not Open Smoothly
If the sliding glass doors that you have in place will not open or close smoothly, this is typically a sign that the tracks of the doors need to be cleaned. It is not uncommon for dirt and debris to build up in the sliding tracks and cause the doors to grinding and jerk as they try to move back and forth. Use a stiff bristled broom to clear out the track and apply a small amount of lubricating oil to the track.
The Sliding Doors Will Not Close At All
If your sliding glass commercial doors will not close at all, this is most likely caused by the sensors that are located on either side of the door. These doors have a safety feature that will prevent them from closing if something is in the way. Therefore, if there is dirt, cobwebs, or debris blocking the eye of the sensor, the doors will not move at all.
By learning to recognize some of the most common problems that can arise with your Industrial Doors in St Louis MO, you will be better equipped to handle a situation when it does arise. Contact The Birdsong Company of St Louis MO for more information.
Be the first to like.