3 Tips for Getting Your Kansas City Inkjet Printer to Print Better

Work is already hard enough in life, you shouldn’t have to take on more stress from your inkjet printers in Kansas City, MO. The print process may not be the easiest, but there are ways that you can make it much easier. If you follow these tips, your printing will become much more consistent and will become a natural part of all your photography. With that being said, here are three tips for getting your Inkjet to print better:

1. Let the Prints Dry Before Evaluation

When inkjet prints leave your printer, they’re going to be dry to the touch. But this doesn’t mean that they are completely dry. The fluid inside of the ink carrier is going to take more time to evaporate completely. During that time, you may see that the colors and the saturation start to change. In that case, give the prints about an hour to rest before you judge the quality of the photo.

2. Evaluate in Good Lighting

Your inkjet printers in Kansas City, MO, need a lot of light in order for you to evaluate it and critique it the right way. If you don’t have enough light that is reflecting off of the print, it’s going to make it seem like it’s too dark. Analyze things in a bright room or in natural sunlight. Visit us for more information.

3. Make Small Test Prints

Have some small 4×6 sheets of the best photo paper that you have on hand. Resize your image and then make a print of it. You might have the urge to make some corrections that you need to make or for any other problems that come up during the process. Contact Gateway Coding for more information about your Inkjet printer.