Trane in Chicago – Troubleshooting a Trane Air Conditioner

Buying from Trane in Chicago is a wise decision because Trane products are renowned for being high quality. Despite this, they may require troubleshooting from time-to-time if you do not maintain them properly. The majority of Trane air conditioners will be split systems, which means that one unit will be situated outdoors and another may be located indoors. The indoor unit will be complete with an evaporator coil and sometimes, problems can be rectified without assistance from a professional. To ensure your Trane in Chicago lasts for many years, here are some troubleshooting tips.

Air Vents

The air vents inside a Trane in Chicago are relied on to move warm and cool air throughout the home. If these become obstructed with debris, the air will have difficulty moving as freely and any air that does travel could be plagued with dust, dog hair, pollen and other types of debris. If you have noticed that the air movement in your air conditioner is not as efficient as it once was, you should examine the ducts to make sure they are not blocked. Pay close attention to the return air vent, which is situated by the indoor unit. If this vent is blocked, air may not travel into the home at all. Focus on the filters too because if these are dirty or damaged, they will need replacing.

Thermostat

It can be very frustrating calling a professional to fix your Trane in Chicago, only to discover that the thermostat was on the wrong setting. The air conditioner may have trouble heating the home if the inside temperature is higher than the actual setting, and vice versa. If the home is warmer or colder than the temperature you want, the thermostat may not be triggered properly. If this does not solve your problem, check if the outdoor unit is blocked in any way. It is common for twigs to lodge inside the components and affect the fan’s movement.

Power Supply

Located near the interior and exterior unit of your Trane in Chicago will be a master switch. The master switch is the main source of power for these A/C systems and if this is set in the ‘off’ position, the device will not work correctly. Move this into the ‘on’ position and test the device again. If the air conditioner still does not work after you flick the master switch, there could be a problem with the circuit breaker. Alternatively, the fuses may have blown and this will mean you need to replace the fuse. If problems continue after doing this, it is likely you will need professional assistance.

 

    

Be the first to like.

Shares