The sink is one of the most common plumbing fixtures used in houses. It’s primarily used for washing hands or items. The sink is installed in the kitchen as well as the bathrooms. Installing a kitchen sink isn’t going to be a problem if you follow the guidelines. For people who are enthusiastic about completing different DIY projects around the house, installing the sink is going to be a good challenge.
However, if you have had no prior experience with installing plumbing fixtures around the house, it would be best to rely on the services of a professional plumbing company like A1plumbingdraindoctor.com for sink installation. Or, if you want to go ahead and install the sink on your own, here are a few tips that will help you out.
Remove the Old Sink
The sink is generally fitted and cemented in the wall, so you will have to remove it by first scraping off the cement. Make sure that you don’t cause damage to the walls, as you will need to install the new sink in its place as well. Take proper measurements when removing the sink, and mark the spots at the far end, on either side, so that you know where the sink will be installed. Of course, before you start with sink installation, it’s imperative that you turn off all water lines.
Fitting the New Sink
Fitting the new sink in place is going to take a bit of time. Once you place the sink in position and connect the pipes, you will need to place cement around the back and sides, then prop the sink in such a way that the cement can dry. You can then decide whether you want to install the new faucets or use the old ones from the previous sink. You can also follow them on Twitter for more information.
Be the first to like.